Robotic solution · Gist Point
Robotic machine tending
Your lathe, machining center or injection machine loaded and unloaded non-stop.
Ideal for: Machines with repetitive cycles where an operator only loads and unloads today.
- Coordinated robot and machine cycles
- Less manual intervention in repetitive tasks
- Integration tailored to the existing process
What it includes
What a cell comes with
6-axis robot
With the reach to enter the machine and get to the part storage.
Double gripper
Removes the finished part and loads the new one in the same trip.
Part storage
Tables or drawers to work for hours without replenishing material.
Machine interface
Signals to open doors, clamp the part and start the cycle.
What it is for
What gets automated
We review cycles, access, fixtures, and control signals to integrate machine tending safely and in coordination with the process.
- Machine loading and unloading
- Part transfer between operations
- Tending machines in repetitive cycles
Clear expectations
What it can and cannot do
It can
- Use the machine during unattended hours.
- Free the operator to check quality or tend other machines.
- Tend one or several machines from the same cell.
It cannot (without help)
- Clear chips or jams that the machine does not prevent.
- Work with machines that cannot exchange signals.
- Pay off with lots of one or two parts that keep changing.
What it takes
Robots and models for this application
FAQ
Frequently asked questions
Which machines can a robot tend?
Lathes, machining centers, grinders, and other equipment that takes parts; it depends on access, door type, and available signals.
How are the part and the machine protected?
With suitable grippers, presence checks, and a loading sequence validated against agreed acceptance criteria.
What happens if the machine stops?
The cell exchanges states and alarms with the machine; responses are defined together with the client's team.
Guides
Guides on robotic machine tending
Other solutions
View all solutions
Next step · Gist Point
Want to automate this process?
Send us photos or a video of the part and the process, and we will tell you whether and how to automate it.