Selected by part, orientation, cycle and space; the decision table is on the page.
2D / 3D vision
Locates the part, verifies presence and guides the pick when position varies.
Gripper or vacuum cup
Tool designed for the part's shape, material and fragility.
Feeding and integration
Trays, conveyors, feeders, conveyor tracking and PLC signals.
What it is for
What gets automated
A pick and place cell is defined by the part, how it arrives, how it must be oriented, with what placement tolerance and at what rate. Those inputs drive robot, vision, gripper, feeding and safety selection. The cell integrates with the PLC and existing line, and is validated with a part trial before quoting the full scope.
Part picking and placing
Orientation and sorting
Assembly and component placement
Presence and quality checks
Feeding cells and machines
Small-part palletizing
Comparison
Which robot fits pick and place
There is no universal robot: the part, orientation, cycle and feeding define the alternative.
Criterion
SCARA
Delta
6-axis
Cobot
Best for
Planar parts and short cycles
Light parts at high rate
Complex orientation and wide reach
Task changes and proximity
Typical payload
Low / medium
Low
Low to high
Low / medium
Cycle
Very short
Very short
Short / medium
Medium
Orientation
Limited to the plane
Limited
Full, 6 axes
Full, 6 axes
Footprint
Compact
Compact
Larger
Compact / medium
Limit
Cannot tilt out of plane
Limited vertical reach
More space and safety
Lower payload and speed
In the catalog
AIR3SC-400 to AIR20SC
Not published
AIR4-560 to AIR50-2230
Not published
In detail
What defines the cell
Vision: when it is needed
Vision is not an automatic add-on. It is justified when parts arrive randomly, stacked or with variable position, or when something must be verified before placement.
2D vision: flat parts and known position.
3D vision: height, volume and orientation.
Bin picking: stacked or random parts.
Conveyor tracking: moving part.
Grippers and feeding
The gripper is chosen by material, surface, weight, fragility and placement accuracy. Feeding defines rate and dead time.
Vacuum, suction cups and soft gripping for delicate surfaces.
Parallel or two-finger gripper for rigid parts.
Trays, conveyors, feeders or bins depending on the part.
Format change with tooling and recipe per product.
Line integration
The cell does not end at the robot: PLC, encoder, safety and plant systems must coordinate for a stable cycle.
Conveyor tracking and encoder synchronization.
PLC, MES or vision system signals.
Fences, light curtains, scanners or cobot with risk assessment.
ISO 10218 and ISO/TS 15066 as references, not a guarantee.
Cycle and ROI with assumptions
Cycle time is calculated from pick, transfer, placement, waiting and release. Payback depends on labor, output, rework and uptime. Any published number must explain its assumptions.
Measure the current cycle with real parts.
Separate external benchmarks from first-party data.
It depends on the part, travel, orientation, cycle and feeding. SCARA, delta, 6-axis and cobot solve different cases; the comparison uses the real task.
When does machine vision make sense?
When part position varies, sorting and verification are needed, or the process requires inspection; it is validated with real samples and defined lighting.
How is the gripper or vacuum cup selected?
By material, surface, weight, fragility, placement accuracy and format changes. The gripper is part of the cell, not a minor accessory.
How is cycle time calculated?
By adding pick, transfer, placement, waiting and release, and validating it with a real trial. The datasheet figure does not replace measurement in the cell.
How does the part arrive at the cell?
Trays, conveyors, feeders, boxes or bins. Feeding defines whether vision is needed, whether a fixed position works or parts must be separated.
What safety does a pick and place cell need?
Whichever comes from the risk assessment: fences, light curtains, scanners or a cobot with safety modes. ISO 10218 and ISO/TS 15066 are references, not an automatic guarantee.
Can it integrate with conveyor tracking and PLC?
Yes, within a defined architecture. Encoder, PLC signals, safety and line synchronization logic are specified.
Can multiple formats be handled?
Yes, with tooling and per-product recipes. Mixed formats and changeover time are assessed during application analysis.
What data do you need to assess my part?
Photos or video of the part and feeding, weight, dimensions, material, orientation, tolerance, rate and environment.
How is the cell ROI calculated?
With output, labor, rework, uptime and format changes. The formula and assumptions are published; no payback is promised without real data.
Guides
Guides on pick and place cell with vision and assembly
Assess your process /Design the solution /Assess your process /Design the solution /Assess your process /Design the solution /Assess your process /Design the solution /